GENERAL INFORMATION
ZIRCAR Silica Moldable
Type RS-SI Moldable is a
wet blanket that is a combination of high purity amorphous silica fibers
and inorganic silica binder. The fibers are 6-9 um in diameter and are
considered non-respirable. Upon drying, Type RS-SI Moldable becomes a
rigid structure with useful properties to temperatures of 1100°C
(2012°F).
Type RS-SI Moldable
exhibits good wet handleability. It is easily cut with scissors or a
knife and can be applied directly to equipment with complex contours. It
can also be used to fabricate flat sheets or boards. Drying can be
accomplished in an oven, with a hot air gun or torch, or by exposure to
heat in the application. Drying results in a strong, rigid, low density
shape that can be re-wet to restore the original moldability. Baking
irreversibly removes the moldability, leaving Refractory Sheet Type RS-SI
Moldable unaffected by moisture.
Type RS-SI Moldable exhibits excellent
resistance to attack by most chemicals with the exception of caustics.
It will tolerate all acids except hydrofluoric acid. It is not wet by
molten aluminum . RS-SI Moldable is 100% organic free and contains no
refractory ceramic fiber. It is readily machined to precision
tolerances with conventional tooling. |
|
SUGGESTED APPLICATIONS
-
Transport of Molten Non- Ferrous
Metals
-
Trough and Launder Liners.
-
Furnace Repair
-
Furnace Door linings and Seals.
-
Expansion Joint Seals.
-
Glass Furnace Crown Insulation.
-
Insulation Wrap for High
Temperature Process Piping.
-
High Temperature Gasketing.
-
High Temperature Kiln and Furnace
Insulation.
-
Self Supporting Mold Wrap.
-
Fabrication into Rigid Silica
Fiber Boards and Cylinders.
-
Useful where Refractory Ceramic Fibers Are Not
Desired.
CHARACTERISTICS & PROPERTIES
Color |
White |
Typical Composition, % |
|
SiO2 |
99+ |
Organics |
None |
Solids Content, as supplied, % |
53 |
Density, dried, g/cc(pcf) |
0.64(40) |
Fiber Diameter, microns |
3 - 4 |
Maximum Use Temperature* C (F) |
1200(2192) |
Melting Point, C (F) |
1698(3000) |
Linear Shrinkage^, % |
|
as supplied to dry at 105°C(222°F) |
0 - 1 |
24hrs. at 1010°C (1850°F) |
5 - 7 |
* Maximum use temperature is dependent on
variables such as stresses, both thermal and mechanical, and the chemical
environment that the material experiences.
‡ Properties expressed perpendicular to
thickness.
AVAILABILITY
tem
# |
Description |
HS50 |
RS-SI, 24" X 36" X 1/8" |
HS51 |
RS-SI, 24" X 36" X 1/4" |
HS52 |
RS-SI, 24" X 36" X 1/2" |
HS53 |
RS-SI, 24" X 36" X 3/4" |
HS54 |
RS-SI, 24" X 36" X 1" |
PRICES ARE SUBJECT TO CHANGE WITHOUT
NOTIFICATION AND ARE SUBJECT TO ZIRCAR REFRACTORY COMPOSITES, INC. TERMS
AND CONDITIONS. ALL PRICES ARE F.O.B. FLORIDA, NY AND ARE IN U.S. DOLLARS
HOME
ZIRCAR REFRACTORY COMPOSITES, INC.
P.O. BOX 489
FLORIDA, NEW YORK 10921
TEL: 845-651-2200, FAX: 845-651-1515
email: sales@zircarchina.com
This information, which is subject to change, is offered
solely for your consideration and should not be taken as a warranty or
representation for which we assume legal responsibility. It is not to be
understood as permission or recommendation to practice a patented invention
without a license and the user should determine whether relevant patents exist.
Copyrights and trademarks are the property of ZIRCAR
Refractory Composites, Inc.
{ for technical problems viewing these pages, please contact sales@zrci.com}
|